Binary number
Background Information
SOS Children made this Wikipedia selection alongside other schools resources. Click here for more information on SOS Children.
Numeral systems by culture 


Positional systems by base 
Decimal (10) 
Balanced ternary 
List of numeral systems 
The binary numeral system, or base2 number system, is a numeral system that represents numeric values using two symbols, usually 0 and 1. More specifically, the usual base 2 system is a positional notation with a radix of 2. Owing to its straightforward implementation in electronic circuitry, the binary system is used internally by all modern computers.
History
The ancient Indian writer Pingala developed advanced mathematical concepts for describing prosody, and in doing so presented the first known description of a binary numeral system, possibly as early as the 8th century BC. Others place him much later; R. Hall, Mathematics of Poetry, has "c. 200 BC". The numeration system was based on the Eye of Horus Old Kingdom numeration system.
A full set of 8 trigrams and 64 hexagrams, analogous to the 3bit and 6bit binary numerals, were known to the ancient Chinese in the classic text I Ching. Similar sets of binary combinations have also been used in traditional African divination systems such as Ifá as well as in medieval Western geomancy.
An ordered binary arrangement of the hexagrams of the I Ching, representing the decimal sequence from 0 to 63, and a method for generating the same, was developed by the Chinese scholar and philosopher Shao Yong in the 11th century. However, there is no evidence that Shao understood binary computation.
In 1605 Francis Bacon discussed a system by which letters of the alphabet could be reduced to sequences of binary digits, which could then be encoded as scarcely visible variations in the font in any random text. Importantly for the general theory of binary encoding, he added that this method could be used with any objects at all: "provided those objects be capable of a twofold difference only; as by Bells, by Trumpets, by Lights and Torches, by the report of Muskets, and any instruments of like nature". (See Bacon's cipher.)
The modern binary number system was fully documented by Gottfried Leibniz in the 17th century in his article Explication de l'Arithmétique Binaire. Leibniz's system used 0 and 1, like the modern binary numeral system.
In 1854, British mathematician George Boole published a landmark paper detailing an algebraic system of logic that would become known as Boolean algebra. His logical calculus was to become instrumental in the design of digital electronic circuitry.
In 1937, Claude Shannon produced his master's thesis at MIT that implemented Boolean algebra and binary arithmetic using electronic relays and switches for the first time in history. Entitled A Symbolic Analysis of Relay and Switching Circuits, Shannon's thesis essentially founded practical digital circuit design.
In November of 1937, George Stibitz, then working at Bell Labs, completed a relaybased computer he dubbed the "Model K" (for "Kitchen", where he had assembled it), which calculated using binary addition. Bell Labs thus authorized a full research program in late 1938 with Stibitz at the helm. Their Complex Number Computer, completed January 8, 1940, was able to calculate complex numbers. In a demonstration to the American Mathematical Society conference at Dartmouth College on September 11, 1940, Stibitz was able to send the Complex Number Calculator remote commands over telephone lines by a teletype. It was the first computing machine ever used remotely over a phone line. Some participants of the conference who witnessed the demonstration were John Von Neumann, John Mauchly, and Norbert Wiener, who wrote about it in his memoirs.
Representation
A binary number can be represented by any sequence of bits (binary digits), which in turn may be represented by any mechanism capable of being in two mutually exclusive states. The following sequences of symbols could all be interpreted as the same binary numeric value of 667:
1 0 1 0 0 1 1 0 1 1           x o x o o x x o x x y n y n n y y n y y
The numeric value represented in each case is dependent upon the value assigned to each symbol. In a computer, the numeric values may be represented by two different voltages; on a magnetic disk, magnetic polarities may be used. A "positive", "yes", or "on" state is not necessarily equivalent to the numerical value of one; it depends on the architecture in use.
In keeping with customary representation of numerals using Arabic numerals, binary numbers are commonly written using the symbols 0 and 1. When written, binary numerals are often subscripted, prefixed or suffixed in order to indicate their base, or radix. The following notations are equivalent:
 100101 binary (explicit statement of format)
 100101b (a suffix indicating binary format)
 100101B (a suffix indicating binary format)
 bin 100101 (a prefix indicating binary format)
 100101_{2} (a subscript indicating base2 (binary) notation)
 %100101 (a prefix indicating binary format)
 0b100101 (a prefix indicating binary format, common in programming languages)
When spoken, binary numerals are usually read digitbydigit, in order to distinguish them from decimal numbers. For example, the binary numeral 100 is pronounced one zero zero, rather than one hundred, to make its binary nature explicit, and for purposes of correctness. Since the binary numeral 100 is equal to the decimal value four, it would be confusing, and numerically incorrect, to refer to the numeral as one hundred.
Counting in binary
Binary  Decimal 

0  0 
1  1 
10  2 
11  3 
100  4 
101  5 
110  6 
111  7 
1000  8 
1001  9 
1010  10 
Counting in binary is similar to counting in any other number system. Beginning with a single digit, counting proceeds through each symbol, in increasing order. Decimal counting uses the symbols 0 through 9, while binary only uses the symbols 0 and 1.
When the symbols for the first digit are exhausted, the nexthigher digit (to the left) is incremented, and counting starts over at 0. In decimal, counting proceeds like so:
 000, 001, 002, ... 007, 008, 009, (rightmost digit starts over, and next digit is incremented)
 010, 011, 012, ...
 ...
 090, 091, 092, ... 097, 098, 099, (rightmost two digits start over, and next digit is incremented)
 100, 101, 102, ...
After a digit reaches 9, an increment resets it to 0 but also causes an increment of the next digit to the left. In binary, counting is the same except that only the two symbols 0 and 1 are used. Thus after a digit reaches 1 in binary, an increment resets it to 0 but also causes an increment of the next digit to the left:
 000, 001, (rightmost digit starts over, and next digit is incremented)
 010, 011, (rightmost two digits start over, and next digit is incremented)
 100, 101, ...
Binary arithmetic
Arithmetic in binary is much like arithmetic in other numeral systems. Addition, subtraction, multiplication, and division can be performed on binary numerals.
Addition
The simplest arithmetic operation in binary is addition. Adding two singledigit binary numbers is relatively simple:
 0 + 0 = 0
 0 + 1 = 1
 1 + 0 = 1
 1 + 1 = 10 (carry:1)
Adding two "1" values produces the value "10" (spoken as "onezero"), equivalent to the decimal value 2. This is similar to what happens in decimal when certain singledigit numbers are added together; if the result equals or exceeds the value of the radix (10), the digit to the left is incremented:
 5 + 5 = 10
 7 + 9 = 16
This is known as carrying in most numeral systems. When the result of an addition exceeds the value of the radix, the procedure is to "carry the one" to the left, adding it to the next positional value. Carrying works the same way in binary:
1 1 1 1 1 (carried digits) 0 1 1 0 1 + 1 0 1 1 1  = 1 0 0 1 0 0
In this example, two numerals are being added together: 01101_{2} (13 decimal) and 10111_{2} (23 decimal). The top row shows the carry bits used. Starting in the rightmost column, 1 + 1 = 10_{2}. The 1 is carried to the left, and the 0 is written at the bottom of the rightmost column. The second column from the right is added: 1 + 0 + 1 = 10_{2} again; the 1 is carried, and 0 is written at the bottom. The third column: 1 + 1 + 1 = 11_{2}. This time, a 1 is carried, and a 1 is written in the bottom row. Proceeding like this gives the final answer 100100_{2} (36 decimal).
When computers must add two numbers, the rule that: x ^ y = x + y % 2 for any two bits x and y allows for very fast calculation, as well.
Subtraction
Subtraction works in much the same way:
 0 − 0 = 0
 0 − 1 = 1 (with borrow)
 1 − 0 = 1
 1 − 1 = 0
One binary numeral can be subtracted from another as follows:
* * * * (starred columns are borrowed from) 1 1 0 1 1 1 0 − 1 0 1 1 1  = 1 0 1 0 1 1 1
Subtracting a positive number is equivalent to adding a negative number of equal absolute value; computers typically use two's complement notation to represent negative values. This notation eliminates the need for a separate "subtract" operation. The subtraction can be summarized with this formula:
A  B = A + not B + 1
For further details, see two's complement.
Multiplication
Multiplication in binary is similar to its decimal counterpart. Two numbers A and B can be multiplied by partial products: for each digit in B, the product of that digit in A is calculated and written on a new line, shifted leftward so that its rightmost digit lines up with the digit in B that was used. The sum of all these partial products gives the final result.
Since there are only two digits in binary, there are only two possible outcomes of each partial multiplication:
 If the digit in B is 0, the partial product is also 0
 If the digit in B is 1, the partial product is equal to A
For example, the binary numbers 1011 and 1010 are multiplied as follows:
1 0 1 1 (A) × 1 0 1 0 (B)  0 0 0 0 ← Corresponds to a zero in B + 1 0 1 1 ← Corresponds to a one in B + 0 0 0 0 + 1 0 1 1  = 1 1 0 1 1 1 0
Binary numbers can also be multiplied with bits after a binary point:
1 0 1.1 0 1 (A) (5.625 in decimal) × 1 1 0.0 1 (B) (6.25 in decimal)  1 0 1 1 0 1 ← Corresponds to a one in B + 0 0 0 0 0 0 ← Corresponds to a zero in B + 0 0 0 0 0 0 + 1 0 1 1 0 1 + 1 0 1 1 0 1  = 1 0 0 0 1 1.0 0 1 0 1 (35.15625 in decimal)
See also Booth's multiplication algorithm.
Division
Binary division is again similar to its decimal counterpart:
__________ 1 0 1  1 1 0 1 1
Here, the divisor is 101_{2}, or 5 decimal, while the dividend is 11011_{2}, or 27 decimal. The procedure is the same as that of decimal long division; here, the divisor 101_{2} goes into the first three digits 110_{2} of the dividend one time, so a "1" is written on the top line. This result is multiplied by the divisor, and subtracted from the first three digits of the dividend; the next digit (a "1") is included to obtain a new threedigit sequence:
1 __________ 1 0 1  1 1 0 1 1 − 1 0 1  0 1 1
The procedure is then repeated with the new sequence, continuing until the digits in the dividend have been exhausted:
1 0 1 __________ 1 0 1  1 1 0 1 1 − 1 0 1  0 1 1 − 0 0 0  1 1 1 − 1 0 1  1 0
Thus, the quotient of 11011_{2} divided by 101_{2} is 101_{2}, as shown on the top line, while the remainder, shown on the bottom line, is 10_{2}. In decimal, 27 divided by 5 is 5, with a remainder of 2.
Bitwise operations
Though not directly related to the numerical interpretation of binary symbols, sequences of bits may be manipulated using Boolean logical operators. When a string of binary symbols is manipulated in this way, it is called a bitwise operation; the logical operators AND, OR, and XOR may be performed on corresponding bits in two binary numerals provided as input. The logical NOT operation may be performed on individual bits in a single binary numeral provided as input. Sometimes, such operations may be used as arithmetic shortcuts, and may have other computational benefits as well. For example, an arithmetic shift left of a binary number is the equivalent of multiplication by a (positive, integral) power of 2.
Conversion to and from other numeral systems
Decimal
To convert from a base10 integer numeral to its base2 (binary) equivalent, the number is divided by two, and the remainder is the leastsignificant bit. The (integer) result is again divided by two, its remainder is the next most significant bit. This process repeats until the result of further division becomes zero.
For example, 118_{10}, in binary, is:

Operation Remainder 118 ÷ 2 = 59 0 59 ÷ 2 = 29 1 29 ÷ 2 = 14 1 14 ÷ 2 = 7 0 7 ÷ 2 = 3 1 3 ÷ 2 = 1 1 1 ÷ 2 = 0 1
Reading the sequence of remainders from the bottom up gives the binary numeral .
This method works for conversion from any base, but there are better methods for bases which are powers of two, such as octal and hexadecimal given below.
To convert from base2 to base10 is the reverse algorithm. Starting from the left, double the result and add the next digit until there are no more. For example to convert 110010101101_{2} to decimal:

Result Remaining digits 0 110010101101 0 × 2 + 1 = 1 10010101101 1 × 2 + 1 = 3 0010101101 3 × 2 + 0 = 6 010101101 6 × 2 + 0 = 12 10101101 12 × 2 + 1 = 25 0101101 25 × 2 + 0 = 50 101101 50 × 2 + 1 = 101 01101 101 × 2 + 0 = 202 1101 202 × 2 + 1 = 405 101 405 × 2 + 1 = 811 01 811 × 2 + 0 = 1622 1 1622 × 2 + 1 = 3245
The result is 3245_{10}.
Binary: 1 1 0 0 1 0 1 0 1 1 0 1 Decimal: [(2^11)*1] + [(2^10)*1] + [(2^9)*0] + [(2^8)*0] + [(2^7)*1] + [(2^6)*0] + [(2^5)*1] + [(2^4)*0] + [(2^3)*1] + [(2^2)*1] + [(2^1)*0] + [(2^0)*1] = 3245
The fractional parts of a number are converted with similar methods. They are again based on the equivalence of shifting with doubling or halving.
In a fractional binary number such as .11010110101_{2}, the first digit is , the second , etc. So if there is a 1 in the first place after the decimal, then the number is at least , and vice versa. Double that number is at least 1. This suggests the algorithm: Repeatedly double the number to be converted, record if the result is at least 1, and then throw away the integer part.
For example, _{10}, in binary, is:

Converting Result 0. 0.0 0.01 0.010 0.0101
Thus the repeating decimal fraction 0.3... is equivalent to the repeating binary fraction 0.01... .
Or for example, 0.1_{10}, in binary, is:

Converting Result 0.1 0. 0.1 × 2 = 0.2 < 1 0.0 0.2 × 2 = 0.4 < 1 0.00 0.4 × 2 = 0.8 < 1 0.000 0.8 × 2 = 1.6 ≥ 1 0.0001 0.6 × 2 = 1.2 ≥ 1 0.00011 0.2 × 2 = 0.4 < 1 0.000110 0.4 × 2 = 0.8 < 1 0.0001100 0.8 × 2 = 1.6 ≥ 1 0.00011001 0.6 × 2 = 1.2 ≥ 1 0.000110011 0.2 × 2 = 0.4 < 1 0.0001100110
This is also a repeating binary fraction 0.000110011... . It may come as a surprise that terminating decimal fractions can have repeating expansions in binary. It is for this reason that many are surprised to discover that 0.1 + ... + 0.1, (10 additions) differs from 1 in floating point arithmetic. In fact, the only binary fractions with terminating expansions are of the form of an integer divided by a power of 2, which 1/10 is not.
The final conversion is from binary to decimal fractions. The only difficulty arises with repeating fractions, but otherwise the method is to shift the fraction to an integer, convert it as above, and then divide by the appropriate power of two in the decimal base. For example:

= 1100 .101110011100... = 1100101110 .0111001110... = 11001 .0111001110... = 1100010101 = (789/62)_{10}
Another way of converting from binary to decimal, often quicker for a person familiar with hexadecimal, is to do so indirectly—first converting ( in binary) into ( in hexadecimal) and then converting ( in hexadecimal) into ( in decimal).
For very large numbers, these simple methods are inefficient because they perform a large number of multiplications or divisions where one operand is very large. A simple divideandconquer algorithm is more effective asymptotically: given a binary number, we divide by 10^{k}, where k is chosen so that the quotient roughly equals the remainder, then each of these pieces is converted to decimal and the two are concatenated. Given a decimal number, we split it into two pieces of about the same size, convert each to binary, then multiply the first piece by 10^{k} and add them, where k is the number of digits in the leastsignificant (rightmost) piece.
Hexadecimal
Binary may be converted to and from hexadecimal somewhat more easily. This is due to the fact that the radix of the hexadecimal system (16) is a power of the radix of the binary system (2). More specifically, 16 = 2^{4}, so it takes four digits of binary to represent one digit of hexadecimal.
The following table shows each hexadecimal digit along with the equivalent decimal value and fourdigit binary sequence:




To convert a hexadecimal number into its binary equivalent, simply substitute the corresponding binary digits:
 3A_{16} = 0011 1010_{2}
 E7_{16} = 1110 0111_{2}
To convert a binary number into its hexadecimal equivalent, divide it into groups of four bits. If the number of bits isn't a multiple of four, simply insert extra 0 bits at the left (called padding). For example:
 01010010_{2} = 0101 0010 grouped with padding = 52_{16}
 11011101_{2} = 1101 1101 grouped = DD_{16}
To convert a hexadecimal number into its decimal equivalent, multiply the decimal equivalent of each hexadecimal digit by the corresponding power of 16 and add the resulting values:
 C0E7_{16} = (12 × 16^{3}) + (0 × 16^{2}) + (14 × 16^{1}) + (7 × 16^{0}) = (12 × 4096) + (0 × 256) + (14 × 16) + (7 × 1) = 49,383_{10}
Octal
Binary is also easily converted to the octal numeral system, since octal uses a radix of 8, which is a power of two (namely, 2^{3}, so it takes exactly three binary digits to represent an octal digit). The correspondence between octal and binary numerals is the same as for the first eight digits of hexadecimal in the table above. Binary 000 is equivalent to the octal digit 0, binary 111 is equivalent to octal 7, and so forth.

Octal Binary 0 000 1 001 2 010 3 011 4 100 5 101 6 110 7 111
Converting from octal to binary proceeds in the same fashion as it does for hexadecimal:
 65_{8} = 110 101_{2}
 17_{8} = 001 111_{2}
And from binary to octal:
 101100_{2} = 101 100_{2} grouped = 54_{8}
 10011_{2} = 010 011_{2} grouped with padding = 23_{8}
And from octal to decimal:
 65_{8} = (6 × 8^{1}) + (5 × 8^{0}) = (6 × 8) + (5 × 1) = 53_{10}
 127_{8} = (1 × 8^{2}) + (2 × 8^{1}) + (7 × 8^{0}) = (1 × 64) + (2 × 8) + (7 × 1) = 87_{10}
Representing real numbers
Nonintegers can be represented by using negative powers, which are set off from the other digits by means of a radix point (called a decimal point in the decimal system). For example, the binary number 11.01_{2} thus means:

1 × 2^{1} (1 × 2 = 2) plus 1 × 2^{0} (1 × 1 = 1) plus 0 × 2^{1} (0 × ½ = 0) plus 1 × 2^{2} (1 × ¼ = 0.25)
For a total of 3.25 decimal.
All dyadic rational numbers have a terminating binary numeral—the binary representation has a finite number of terms after the radix point. Other rational numbers have binary representation, but instead of terminating, they recur, with a finite sequence of digits repeating indefinitely. For instance
 = = 0.0101010101..._{2}
 = = 0.10110100 10110100 10110100..._{2}
The phenomenon that the binary representation of any rational is either terminating or recurring also occurs in other radixbased numeral systems. See, for instance, the explanation in decimal. Another similarity is the existence of alternative representations for any terminating representation, relying on the fact that 0.111111... is the sum of the geometric series 2^{1} + 2^{2} + 2^{3} + ... which is 1.
Binary numerals which neither terminate nor recur represent irrational numbers. For instance,
 0.10100100010000100000100.... does have a pattern, but it is not a fixedlength recurring pattern, so the number is irrational
 1.0110101000001001111001100110011111110... is the binary representation of , the square root of 2, another irrational. It has no discernible pattern, although a proof that is irrational requires more than this. See irrational number.