Examples of thick lens in the following topics:
-
- The lensmaker's formula is used to relate the radii of curvature, the thickness, the refractive index, and the focal length of a thick lens.
- A lens whose thickness is not negligible is called a thick lens.
- Instead the extent of the refraction must be dependent on the thickness of the lens.
- The focal length of a thick lens in air can be calculated from the lensmaker's equation:
- The above equation can be greatly simplified if the lens thickness d is very small compared to R1 and R2.
-
- A thin lens is defined to be one whose thickness allows rays to refract, as illustrated in , but does not allow properties such as dispersion and aberrations.
- An ideal thin lens has two refracting surfaces but the lens is thin enough toassume that light rays bend only once.
- Another way of saying this is that the lens thickness is much much smaller than the focal length of the lens.
- A thin symmetrical lens has two focal points, one on either side and both at the same distance from the lens.
- The treatment of a lens as a thin lens is known as the "thin lens approximation. "
-
- Types of aberrations vary due to the size, material composition, or thickness of a lens, or the position of an object.
- This aberration happens when the lens fails to focus all the colors on the same convergence point .
- Since violet rays have a higher refractive index than red, they are bent more and focused closed to the lens. shows a two-lens system using a diverging lens to partially correct for this, but it is nearly impossible to do so completely.
- Spherical aberrations are a form of aberration where rays converging from the outer edges of a lens converge to a focus closer to the lens, and rays closer to the axis focus further.
- The apparent effect is that of an image which has been mapped around a sphere, like in a fisheye lens.
-
- It is made of two convex lenses: the first, the ocular lens, is close to the eye; the second is the objective lens.
- The first lens is called the objective lens and is closest to the object being observed.
- The objective lens creates an enlarged image of the object, which then acts as the object for the second lens.
- The distance between the objective lens and the ocular lens is slightly shorter than the focal length of the ocular lens, fe.
- where m is total magnification, mo is objective lens magnification, me is ocular lens magnification.
-
- Such a lens is called a converging (or convex) lens for the corresponding effect it has on light rays.
- The concave lens is a diverging lens, because it causes the light rays to bend away (diverge) from its axis.
- The distance from the center of the lens to the focal point is again called the focal length f of the lens.
- The more powerful the lens, the closer to the lens the rays will cross.
- Compare the effect of a convex lens and a concave lens on the light rays
-
- How does a lens form an image of an object?
- A ray entering a converging lens parallel to its axis passes through the focal point F of the lens on the other side.
- The third ray passes through the nearer focal point on its way into the lens and leaves the lens parallel to its axis (rule 4).
- The thin lens equation is:
- Ray tracing is used to locate the image formed by a lens.
-
- A compound lens is an array of simple lenses with a common axis.
- In contrast to a simple lens, which consists of only one optical element, a compound lens is an array of simple lenses (elements) with a common axis.
- An achromatic lens or achromat is a lens that is designed to limit the effects of chromatic and spherical aberration.
- In the most common type (shown in ), the positive power of the crown lens element is not quite equaled by the negative power of the flint lens element.
- Calculate focal length for a compound lens from the focal lengths of simple lenses
-
- A magnifying glass is a convex lens that lets the observer see a larger image of the object being observed.
- A magnifying glass is a convex lens that lets the observer see a larger image of the object under observation.
- The lens is usually mounted in a frame with a handle, as shown below .
- The highest magnifying power is obtained by putting the lens very close to the eye and moving both the eye and the lens together to obtain the best focus.
- When the lens is used this way, the magnifying power can be found with the following equation:
-
- The outer rings are spaced more closely than the inner ones because the slope of the curved lens surface increases outwards.
- where N is the bright-ring number, R is the radius of curvature of the lens the light is passing through, and λ is the wavelength of the light passing through the glass.
- A spherical lens is placed on top of a flat glass surface.
- An incident ray of light passes through the curved lens until it comes to the glass-air boundary, at which point it passes from a region of higher refractive index n (the glass) to a region of lower n (air).
- As one gets farther from the point at which the two surfaces touch, the distance d increases because the lens is curving away from the flat surface .
-
- The lens of the eye is similar to one in glasses or cameras.
- The lens provides the remaining power.
- The image passes through several layers of the eye, but happens in a way very similar to that of a convex lens.
- The power of the lens of an eye is adjustable to provide an image on the retina for varying object distances.
- Layers of tissues with varying indices of refraction in the lens are shown here.