Boiling

Examples of Boiling in the following topics:

• Boiling Point Elevation

  • The boiling point of a solvent is elevated in the presence of solutes.
  • This is referred to as boiling point elevation.
  • In this equation, $\Delta T_b$ is the boiling point elevation, $K_b$ is the boiling point elevation constant, and m is the molality of the solution.
  • Water normally boils at 100 oC, so the new boiling point of the solution would be 100.38 oC.
  • The boiling point of a pure liquid.

• Boiling Point and Water Solubility

  • It is instructive to compare the boiling points and water solubility of amines with those of corresponding alcohols and ethers.
  • Corresponding -N-H---N- hydrogen bonding is weaker, as the lower boiling points of similarly sized amines (light green columns) demonstrate.
  • Since 1º-amines have two hydrogens available for hydrogen bonding, we expect them to have higher boiling points than isomeric 2º-amines, which in turn should boil higher than isomeric 3º-amines (no hydrogen bonding).
  • Indeed, 3º-amines have boiling points similar to equivalent sized ethers; and in all but the smallest compounds, corresponding ethers, 3º-amines and alkanes have similar boiling points.
  • In the examples shown here, it is further demonstrated that chain branching reduces boiling points by 10 to 15 ºC.

• Boiling & Melting Points

  • A clear conclusion to be drawn from this fact is that intermolecular attractive forces vary considerably, and that the boiling point of a compound is a measure of the strength of these forces.
  • The formula of each entry is followed by its formula weight in parentheses and the boiling point in degrees Celsius.
  • The melting points of crystalline solids cannot be categorized in as simple a fashion as boiling points.
  • Spherically shaped molecules generally have relatively high melting points, which in some cases approach the boiling point.
  • The last compound, an isomer of octane, is nearly spherical and has an exceptionally high melting point (only 6º below the boiling point).

• Hydrogen Bonding

  • Most of the simple hydrides of group IV, V, VI & VII elements display the expected rise in boiling point with molecular mass, but the hydrides of the most electronegative elements (nitrogen, oxygen and fluorine) have abnormally high boiling points for their mass.
  • Once you are able to recognize compounds that can exhibit intermolecular hydrogen bonding, the relatively high boiling points they exhibit become understandable.
  • Alcohols boil considerably higher than comparably sized ethers (first two entries), and isomeric 1º, 2º & 3º-amines, respectively, show decreasing boiling points, with the two hydrogen bonding isomers being substantially higher boiling than the 3º-amine (entries 5 to 7).
  • As expected, the presence of two hydrogen bonding functions in a compound raises the boiling point even further.
  • Comparison of Boiling Points of Methane, Ammonia, Water, and Hydrogen Fluoride

• Phase Changes and Energy Conservation

  • As an example, if you boil water, it never goes above 100 degrees Celsius.
  • To boil or melt one mole of a substance, a certain amount of energy is required.
  • If that amount of energy is added to a mole of that substance at boiling or freezing point, all of it will melt or boil, but the temperature won't change.
  • For example, the boiling point of water is 100º C at 1.00 atm.
  • As the pressure increases, the boiling temperature rises steadily to 374º C at a pressure of 218 atm.

• Liquid to Gas Phase Transition

  • There are two types of vaporization: evaporation and boiling.
  • Boiling, by contrast, is a rapid vaporization that occurs at or above the boiling temperature and at or below the liquid's surface.
  • For both of these reasons, a liquid will not boil until the temperature is raised slightly above the boiling point, a phenomenon known as superheating.
  • Once the boiling begins, it will continue to do so at the liquid's proper boiling point.
  • What does boiling look like at the molecular level?

• Physical Properties of Carboxylic Acids

  • The table at the beginning of this page gave the melting and boiling points for a homologous group of carboxylic acids having from one to ten carbon atoms.
  • The boiling points increased with size in a regular manner, but the melting points did not.
  • The factors that influence the relative boiling points and water solubilities of various types of compounds were discussed earlier.
  • The first five entries all have oxygen functional groups, and the relatively high boiling points of the first two is clearly due to hydrogen bonding.
  • Carboxylic acids have exceptionally high boiling points, due in large part to dimeric associations involving two hydrogen bonds.

• Background and Properties

  • The following table lists some representative derivatives and their boiling points.
  • Boiling points are given for 760 torr (atmospheric pressure), and those listed as a range are estimated from values obtained at lower pressures.
  • As noted earlier, the relatively high boiling point of carboxylic acids is due to extensive hydrogen bonded dimerization.
  • The relatively high boiling points of equivalent 3º-amides and nitriles are probably due to the high polarity of these functions.
  • Indeed, if hydrogen bonding is not present, the boiling points of comparable sized compounds correlate reasonably well with their dipole moments.

• Farenheit Scale

  • In the Fahrenheit scale, the freezing of water is defined at 32 degrees, while the boiling point of water is defined to be 212 degrees.
  • On this scale, water's freezing point is defined to be 32 degrees, while water's boiling point is defined to be 212 degrees.
  • The Fahrenheit system puts the boiling and freezing points of water exactly 180 degrees apart.
  • Therefore, a degree on the Fahrenheit scale is 1/180 of the interval between the freezing point and the boiling point.
  • On the Celsius scale, the freezing and boiling points of water are 100 degrees apart.

• Water’s Heat of Vaporization

  • Water in its liquid form has an unusually high boiling point temperature, a value close to 100°C.
  • As a result, water acts as a heat sink, or heat reservoir, and requires much more heat to boil than does a liquid such as ethanol (grain alcohol), whose hydrogen bonding with other ethanol molecules is weaker than water's hydrogen bonding.
  • Even when below its boiling point, water's individual molecules acquire enough energy from each other such that some surface water molecules can escape and vaporize; this process is known as evaporation .
  • (a) Because of the distribution of speeds and kinetic energies, some water molecules can break away to the vapor phase even at temperatures below the ordinary boiling point.
  • Explain how heat of vaporization is related to the boiling point of water