Hafnium

From Wikipedia, the free encyclopedia

Jump to: navigation, search
72 lutetiumhafniumtantalum
Zr

Hf

Rf
Periodic Table - Extended Periodic Table
General
Name, Symbol, Number hafnium, Hf, 72
Chemical series transition metals
Group, Period, Block 4, 6, d
Appearance grey steel
Standard atomic weight 178.49(2)  g·mol−1
Electron configuration [Xe] 4f14 5d2 6s2
Electrons per shell 2, 8, 18, 32, 10, 2
Physical properties
Phase solid
Density (near r.t.) 13.31  g·cm−3
Liquid density at m.p. 12  g·cm−3
Melting point 2506 K
(2233 °C, 4051 °F)
Boiling point 4876 K
(4603 °C, 8317 °F)
Heat of fusion 27.2  kJ·mol−1
Heat of vaporization 571  kJ·mol−1
Heat capacity (25 °C) 25.73  J·mol−1·K−1
Vapor pressure
P(Pa) 1 10 100 1 k 10 k 100 k
at T(K) 2689 2954 3277 3679 4194 4876
Atomic properties
Crystal structure hexagonal
Oxidation states 4
(amphoteric oxide)
Electronegativity 1.3 (scale Pauling)
Ionization energies
(more)
1st:  658.5  kJ·mol−1
2nd:  1440  kJ·mol−1
3rd:  2250  kJ·mol−1
Atomic radius 155  pm
Atomic radius (calc.) 208  pm
Covalent radius 150  pm
Miscellaneous
Magnetic ordering no data
Electrical resistivity (20 °C) 331 n Ω·m
Thermal conductivity (300 K) 23.0  W·m−1·K−1
Thermal expansion (25 °C) 5.9  µm·m−1·K−1
Speed of sound (thin rod) (20 °C) 3010 m/s
Young's modulus 78  GPa
Shear modulus 30  GPa
Bulk modulus 110  GPa
Poisson ratio 0.37
Mohs hardness 5.5
Vickers hardness 1760  MPa
Brinell hardness 1700  MPa
CAS registry number 7440-58-6
Selected isotopes
Main article: Isotopes of hafnium
iso NA half-life DM DE (MeV) DP
172Hf syn 1.87 y ε 0.350 172Lu
174Hf 0.162% 2×1015 y α 2.495 170Yb
176Hf 5.206% Hf is stable with 104 neutrons
177Hf 18.606% Hf is stable with 105 neutrons
178Hf 27.297% Hf is stable with 106 neutrons
178m2Hf syn 31 y IT 2.446 178Hf
179Hf 13.629% Hf is stable with 107 neutrons
180Hf 35.1% Hf is stable with 108 neutrons
182Hf syn 9×106 y β 0.373 182Ta
References

Hafnium (IPA: /ˈhæfniəm/) is a chemical element that has the symbol Hf and atomic number 72. A lustrous, silvery gray tetravalent transition metal, hafnium resembles zirconium chemically and it is found in zirconium minerals. Hafnium is used in tungsten alloys in filaments and electrodes, and it also acts as a neutron absorber in control rods in nuclear power plants.

Contents

  • 1 Notable characteristics
  • 2 Applications
  • 3 History
  • 4 Occurrence
  • 5 Precautions
  • 6 See also
  • 7 References
  • 8 External links

[edit] Notable characteristics

Hafnium metal

Hafnium is a shiny silvery, ductile metal that is corrosion resistant and chemically extremely similar to zirconium. The physical properties of hafnium are markedly affected by zirconium impurities, and these two elements are among the most difficult ones to separate. A notable physical difference between them is their density (zirconium being about half as dense as hafnium), but chemically the elements are extremely similar.

The most notable physical property of hafnium is that it has a very high neutron-capture cross-section, and several isotopes of hafnium nuclei can absorb multiple neutrons. This makes hafnium a good material for use in the control rods for nuclear reactors. Its neutron-capture cross-section is about 600 times that of zirconium. (Other elements that are good neutron-absorbers for control rods are cadmium and boron.)

Separation of hafnium and zirconium becomes very important in the nuclear power industry, since zirconium is a good fuel-rod cladding metal, with the desirable properties of a very low neutron capture cross-section, and a good chemical stability at high temperatures. However, because of hafnium's neutron-absorbing properties, hafnium impurities in zirconium would cause it to be far less useful for nuclear reactor materials applications. Thus a nearly-complete separation of zirconium and hafnium is necessary for their use in nuclear power.

Hafnium carbide is the most refractory binary compound known, with a melting point >3890 °C, and hafnium nitride is the most refractory of all known metal nitrides, with a melting point of 3310 °C.[1] This has led to proposals that hafnium or its carbides might be useful as construction materials that are subjected to very high temperatures.

The metal is resistant to concentrated alkalis, but halogens react with it to form hafnium tetrahalides.[1] At higher temperatures hafnium reacts with oxygen, nitrogen, carbon, boron, sulfur, and silicon.

The nuclear isomer Hf-178-m2 is also a source of cascades of gamma rays whose energies total to 2.45 MeV per decay.[2] It is notable because it has the highest excitation energy of any comparably long-lived isomer of any element. One gram of pure Hf-178-m2 would contain approximately 1330 megajoules of energy, the equivalent of exploding about 317 kilograms (700 pounds) of TNT. Possible applications requiring such highly concentrated energy storage are of interest. For example, it has been studied as a possible power source for gamma ray lasers.[3]

[edit] Applications

Hafnium is used to make control rods for nuclear reactors because of its ability to absorb neutrons (its thermal neutron absorption cross section is nearly 600 times that of zirconium), excellent mechanical properties and exceptional corrosion-resistance properties.

Other uses:

[edit] History

The hafnium seal of the Faculty of Science of the University of Copenhagen

The 1869 periodic table by Mendeleev had implicitly predicted the existence of a heavier analog of titanium and zirconium, but in 1871 Mendeleev placed lanthanum in that spot.

The existence of a gap in the periodic table for an as-yet undiscovered element 72 was predicted by Henry Moseley in 1914. Hafnium was named for the Latin name Hafnia for "Copenhagen", the home town of Niels Bohr. It was discovered by Dirk Coster and Georg von Hevesy in 1923 in Copenhagen, Denmark, validating the original 1869 prediction of Mendeleev. Soon thereafter, the new element was predicted to be associated with zirconium by using the Bohr theories of the atom, and it was finally found in zircon through X-ray spectroscopy analysis in Norway.

Hafnium was separated from zirconium through repeated recrystallization of the double ammonium or potassium fluorides by Jantzen and von Hevesey. Metallic hafnium was first prepared by Anton Eduard van Arkel and Jan Hendrik de Boer by passing hafnium tetra-iodide vapor over a heated tungsten filament. This process for differential purification of Zr and Hf is still in use today.

The Faculty of Science of the University of Copenhagen uses in its seal a stylized image of hafnium.

[edit] Occurrence

Hafnium is estimated to make up about 0.00058% of the Earth's upper crust by weight. It is found combined in natural zirconium compounds but it does not exist as a free element in nature. Minerals that contain zirconium, such as alvite [(Hf, Th, Zr)SiO4 H2O], thortveitite, and zircon (ZrSiO4), usually contain between 1 and 5% hafnium. Hafnium and zirconium have nearly identical chemistry, which makes the two difficult to separate. About half of all hafnium metal manufactured is produced as a by-product of zirconium refinement. This is done through reducing hafnium(IV) chloride with magnesium or sodium in the Kroll process.

A lump of hafnium which has been oxidized on one side and is showing thin film optical effects.

A major source of zircon (and hence hafnium) ores are heavy mineral sands ore deposits, pegmatites particularly in Brazil and Malawi, and carbonatite intrusions particularly the Crown Polymetallic Deposit at Mount Weld, Western Australia. A potential source of hafnium is trachyte tuffs containing rare zircon-hafnium silicates eudialyte or armostrongite, at Dubbo in New South Wales, Australia.[10]

[edit] Precautions

Care needs to be taken when machining hafnium because, like its sister metal zirconium, when hafnium is divided into fine particles, it is pyrophoric and can ignite spontaneously in air (see Dragon's Breath for a demonstration). Compounds that contain this metal are rarely encountered by most people. The pure metal is not considered toxic, but hafnium compounds should be handled as if they are toxic because the ionic forms of metals are normally at greatest risk for toxicity, and limited animal testing has been done for hafnium compounds.