Centimetre gram second system of units
From Wikipedia, the free encyclopedia
This article or section is in need of attention from an expert on the subject. WikiProject Science or the Science Portal may be able to help recruit one. |
This article needs additional references or sources for verification. Please help improve this article by adding reliable references. (help, get involved!) Unverifiable material may be challenged and removed. |
The centimetre-gram-second system (CGS) is a system of physical units. It is always the same for mechanical units, but there are several variants of electric additions. It was replaced by the MKS, or metre-kilogram-second system, which in turn was replaced by the International System of Units (SI), which has the three base units of MKS plus the ampere, mole, candela and kelvin.
Dimension | Unit | Definition | SI |
---|---|---|---|
length | centimetre | non-existent | = 10−2 m |
mass | gram | non-existent | = 10−3 kg |
time | second | 1 s | |
force | dyne | non-existent | = 10−5 N |
energy | erg | non-existent | = 10−7 J |
power | erg per second | non-existent | = 10−7 W |
pressure | barye | non-existent | = 10−1 Pa |
viscosity | poise | non-existent | = 10−1 Pa·s |
The system goes back to a proposal made in 1832 by the German mathematician Carl Friedrich Gauss and was in 1874 extended by the British physicists James Clerk Maxwell and William Thomson with a set of electromagnetic units. The sizes (order of magnitude) of many CGS units turned out to be inconvenient for practical purposes, therefore the CGS system never gained wide general use outside the field of electrodynamics and was gradually superseded internationally starting in the 1880s but not to a significant extent until the mid-20th century by the more practical MKS (metre-kilogram-second) system, which led eventually to the modern SI standard units.
CGS units are still occasionally encountered in technical literature, especially in the United States in the fields of electrodynamics and astronomy. SI units were chosen such that electromagnetic equations concerning spheres contain 4π, those concerning coils contain 2π and those dealing with straight wires lack π entirely, which was the most convenient choice for electrical-engineering applications. In those fields where formulas concerning spheres dominate (for example, astronomy), it has been argued that the CGS system can be notationally slightly more convenient.
Starting from the international adoption of the MKS standard in the 1940s and the SI standard in the 1960s, the technical use of CGS units has gradually disappeared worldwide, in the United States more slowly than in the rest of the world. CGS units are today no longer accepted by the house styles of most scientific journals, textbook publishers and standards bodies, although they are commonly used in astronomical journals such as the Astrophysical Journal.
The units gram and centimetre remain useful within the SI, especially for instructional physics and chemistry experiments, where they match well the small scales of table-top setups. In these uses, they are occasionally referred to as the system of “LAB” units. However, where derived units are needed, the SI ones are generally used and taught today instead of the CGS ones.
Contents
|
[edit] Electrostatic units
While for most units the difference between cgs and SI are just powers of 10, the differences in electromagnetic units are more involved; so much so that formulas for physical laws of E&M are adjusted depending on what system of units one uses. In SI, electric current is defined via the magnetic force it exerts and charge is then defined as current multiplied with time. In one variant of the cgs system, electrostatic units (esu), charge is defined via the force it exerts on other charges, and current is then defined as charge per time. One consequence of this approach is that Coulomb’s law does not contain a constant of proportionality. What this means specifically is that in cgs electrostatic units, the unit of charge or statcoulomb, is defined as such a quantity of charge that the Coulomb force constant is set to 1. That is, for two point charges, each with 1 statcoulomb spaced apart by 1 centimetre, the electrostatic force between them will be, by definition, precisely one dyne. This also has the effect of eliminating a separate dimension or fundamental unit for electric charge. In cgs electrostatic units, a statcoulomb is the same as a centimetre times square root of dyne. Dimensionally in the cgs esu system, charge Q is equivalent to M1/2L3/2T-1 and not an independent dimension of physical quantity. This reduction of units is an application of the Buckingham π theorem.
When considering a dielectric in cgs units, the electric displacement D = εr E, where εr = ε / ε0 is the relative dielectric constant and E is the electric field.
While the proportional constants in cgs simplify theoretical calculations, they have the disadvantage that the units in cgs are hard to define through experiment. SI on the other hand starts with a unit of current, the ampere which is easy to determine through experiment, but which requires that the constants in the electromagnetic equations take on odd forms.
Ultimately, relating electromagnetic phenomena to time, length and mass relies on the forces observed on charges. There are two fundamental laws in action: Coulomb’s law, which describes the electrostatic force between charges, and Ampère’s law, which describes the electrodynamic (or electromagnetic) force between currents. Each of these includes one proportionality constant, k1 or k2. The static definition of magnetic fields yields a third proportionality constant, . The first two constants are related to each other through the speed of light, c (the ratio of k1 over k2 must equal c2).
We then have several choices:
k1 | k2 | α | yields |
---|---|---|---|
1 | c−2 | 1 | electrostatic cgs system (esu) |
c2 | 1 | 1 | electromagnetic cgs system (emu) |
1 | c−2 | c−1 | Gaussian cgs system |
(4·π·ε0)−1 | µ0·(4·π)−1 | 1 | SI |
Dimension | Unit | Definition | SI |
---|---|---|---|
charge | electrostatic unit of charge, franklin, statcoulomb | 1 esu = 1 statC = 1 Fr = √(g·cm³/s²) | = 3.33564 × 10−10 C |
electric current | 1 esu/s | = 3.33564 × 10−10 C/s | |
electric potential | statvolt | 1 statV = 1 erg/esu | = 299.792458 V |
electric field | 1 statV/cm = 1 dyn/esu | = 2.99792458 × 104 V/m | |
magnetic field strength H | oersted | 1 Oe | = 1000/(4π) A/m = 79.577 A/m |
magnetic flux | maxwell | 1 Mw = 1 G·cm² | = 10−8 Wb |
magnetic induction B | gauss | 1 G = 1 M/cm² | = 10−4 T |
resistance | 1 s/cm | = 8.988 × 1011 Ω | |
resistivity | 1 s | = 8.988 × 109 Ω·m | |
capacitance | 1 cm | = 1.113 × 10−12 F | |
inductance | 1 s²/cm | = 8.988 × 1011 H | |
wavenumber | kayser | 1 /cm | = 100 /m |
The mantissas derived from the speed of light are more precisely 299792458, 333564095198152, 1112650056, and 89875517873681764.
A centimetre of capacitance is the capacitance between a sphere of radius 1 cm in vacuum and infinity. The capacitance C between two concentric spheres of radii R and r is
.
By taking the limit as R goes to infinity we see C equals r.
[edit] Physical constants in CGS units[1]
Constant | Symbol | Value |
---|---|---|
Atomic mass unit | u | 1.660 × 10−24 g |
Avogadro constant | NA | 6.022 × 1023 (mol)−1 |
Bohr magneton | μB | 9.274 × 10−21 erg/gauss |
Bohr radius | ao | 5.291 × 10−9 cm |
Boltzmann constant | k | 1.380 × 10−16 erg/K |
Electron mass | me | 9.109 × 10−28 g |
Elementary charge | e | 4.803 × 10−10 esu |
Fine-structure constant | α | 7.297 × 10−3 |
Gravitational constant | G | 6.674 × 10−8 cm3/g-s2 |
Planck constant | h | 6.626 × 10−27 erg-s |
Speed of light in vacuum | c | 2.998 × 1010 cm/s |
[edit] Other variants
There were at various points in time about half a dozen systems of electromagnetic units in use, most based on the cgs system. These include electromagnetic units (emu, chosen such that the Biot-Savart law has no constant of proportionality), Gaussian units, and Heaviside-Lorentz units.
Further complicating matters is the fact that some physicists and engineers in the United States use hybrid units, such as volts per centimetre for electric field. However, this also can be seen more as an application of the previously described "LAB" units usage since electric fields near small circuit devices would be measured across distances on the order of magnitude of one centimetre.
[edit] Pro and contra
A key virtue of the Gaussian CGS system is that electric and magnetic fields have the same units, 4πε0 equals 1, and the only dimensional constant appearing in the equations is c, the speed of light. The Heaviside-Lorentz system has these desirable properties as well (with ε0 equalling 1), but is a "rationalized" system (as is SI) in which the charges and fields are defined in such a way that there are many fewer factors of 4π appearing in the formulas, and it is in Heaviside-Lorentz units that the Maxwell equations take their simplest possible form.
At the same time, the elimination of ε0 and μ0 can also be viewed as a major disadvantage of all the variants of the CGS system. Within classical electrodynamics, this elimination makes sense because it greatly simplifies the Maxwell equations. In quantum electrodynamics, however, the vacuum is no longer just empty space, but it is filled with virtual particles that interact in complicated ways. The fine structure constant in Gaussian CGS is given as and it has been cause to much mystification how its numerical value
should be explained. In SI units with
it may be clearer that it is in fact the complicated quantum structure of the vacuum that gives rise to a non-trivial vacuum permittivity. However, the advantage would be purely pedagogical, and in practice, SI units are essentially never used in quantum electrodynamics calculations.